Qty: 0 Total:

$ 0.00 

 
...
Categories
Home l Site Map l Contact Us l Company Info l Account l Cart l Checkout l Forums
Site Map 
Specials 
Order Tracking 


Accessories

BFT

Electric Locks

Gate Hardware

Gate Openers

Home Security

Keypads

Lock Boxes

Long Range Receivers

Long Range Transmitters

Loops & Loop Detectors

Magnetic Locks

Multi-Door Access Controllers

Parts

Proximity & Card Readers

Receivers

Remotes

Safety Edge

Telephone Entry Systems

Vehicle Detection
What's New
1. Sears Craftsman Liftmaster garage door opener wireless keypad model 977LM Security+
2. Genie GIRUD-1T Universal Dual Frequency Conversion Kit
3. Chamberlain LiftMaster 387LM Universal Keyless Entry System
4. Elite DC-2000 SL DM Power Back Up System for SL-3000 DM UL
5. Elite DC-2000 SL DM Power Back Up System for SL-3000 DM UL
Top Sellers
1. MultiLink SD-300M MultiCode-Compatible Mini Keychain Garage Door Opener Remote
2. Stanley Gate Operator and Garage Door Opener Remote Transmitter Model 1050
3. Multicode 3089 Gate or Garage Door Opener Remote Transmitter (IL:B1B4)
4. Multicode 3089 Gate or Garage Door Opener Remote Transmitter
5. MultiLink SD-300M MultiCode-Compatible Mini Keychain Garage Door Opener Remote (IL:D1A2)
 
 
Credit Cards

Linear 1-Channel Digital Isolated Relay Output Receiver DXR-701 (DXR-701)

Linear 1-Channel Digital Isolated  Relay Output Receiver DXR-701

While Supplies Last

The Model DXR-701 is a digital receiver with an isolated relay output designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the relay output activates. The relay has four optional output configurations.

In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other device. A transmitter is used to activate or control the device. The receiver should be mounted with the supplied mounting bracket indoors or outdoors inside a weather resistant non-metallic housing.

The digital DX code format features over a million possible codes. The DX transmitters are precoded at the factory to unique codes, so no field coding is required. Receivers must be programmed to the transmitter’s code before system testing and operation. Up to 32 transmitters can be programmed into the receiver’s memory. The memory is retained, even without power.

The unit can be powered from a 11-17 VDC or 12-16 VAC power source. The relay’s normally open and normally closed contacts can switch up to 1 amp at 24 volts AC/DC.

Manual

Features
  • 32 transmitter capacity
  • RF activity indicator
  • Quick-learn programming
  • Operates on 11-17 VDC or 12-16 VAC power
  • One channel
  • DX format
  • One form "C" relay output
  • One Amp contact rating @ 24 Volts AC/DC
  • Selectable relay activation time
  • Current consumption: 25 mA standby, 60 mA operating @ 12 VDC
  • RF frequency: 315 MHz
  • 5.5" W x 4.0" H x 1.25" D
Compatible Remotes
  • Linear 1-Button, 1-Channel Mini Remote Control DXT-41
  • Linear 2-Button, 3-Channel Mini Remote Control DXT-42
  • Linear 2-Button, 1-Channel Handheld Transmitter DXT-21
  • Linear 3-Button, 4-Channel Handheld Transmitter DXT-23
  • Linear 5-Button, 8-Channel Handheld Transmitter DXT-25
  • Linear 1-Button, 1-Channel Pendant Transmitter DXT-61A
Other Compatible Products
  • Linear Home Security Passive Infrared Motion Detector DXT-54
  • Linear Door/Window Home Security External Contact and Glass
    Break Sensor DXT-31
  • Linear Battery Powered Cash Drawer Bill Trap DXT-81
  • Linear Home Security Supervised Photoelectric Smoke Detector DXS-72
Operating Frequency: 315 MHz
Data Format: DX format
Number of Codes: 1,048,575
Channels: one channel
Measured Range: 700 feet in one quadrant with DXT-21 transmitter; 500 feet in open air (four quadrant test)
Operating Temperature: 32° to 140°  F (0° to 60° C)
Sensitivity: -95 dBm (typical)
Number of Stored Transmitter Codes: 32 per receiver
Receiver Output: For "C" relay contact, 1 amp, at 32 VDC per channel
Field Selectable Receiver Output Modes: Momentary, four seconds (factory set)
Momentary, one second
Flip-flop toggle
latch, 2-Channel
MODE BUTTON (one per channel)
Learn Mode: Press and release to enter learn mode
Transmitters
Learned:
Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
Erase Memory: Press and hold for five seconds after the last LED flash to delete all transmitters on an associated channel
Clear Latch: Press and release
Clear Low
Battery:
Press and release mode switch on channel 2 (DXR-702 only) to clear low battery
LED INDICATOR
Steady: Indicates "learn" mode
Flashing: Indicates number of transmitters learned on the selected channel
RF Activity: Blinks synchronously with detected RF activity
Antenna: Wire lead
Input Impedance: 75 Ohm - 2:1 VSWR
Operating Voltage: 11 to 17.5 VDC
12 to 16 VAC
Current: 25 mA at standby at 12 VDC
60 mA in alarm at 12 VDC
Connectors: Screw terminal,+,-, with N/O, N/C, and common per receiver channel
Dimensions: 5.5 in L x 1.25 in W x 4 in H (140 x 32 x 102 mm), excluding antenna
Accessories: Mounting bracket, screws, and anchors (supplied)
Regulatory Requirements: FCC and DOC


Related Products :
Gate Supplies > Receivers > Linear
Gate Supplies > Home Security > Linear > Wireless Receivers

Product Reviews :
Write a review
  
Ready To Order?

Our Price: $48.00

Item in stock!

 

Email a Friend

Product Inquiry

Official PayPal Seal Verified by VISA


Copyright © 2009 by Mega Access Controls, Inc. All Rights Reserved.
No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Access Controls, Inc.